Low Odor Mastic Remover
Chemsafe 100C HP is a specifically formulated product developed by Chemsafe Brands for use in the quick and efficient removal of asphaltic floor tile mastic. Great for glue down carpets. This fast-acting emulsifiable solvent quickly dissolves floor tile mastic and is equally efficient in removing spray adhesive and natural pastes and glues on tough asbestos abatement jobs. The high-performance formula is designed to leave no oily or waxy residue, making it ideal for use on a variety of surfaces. Additionally, Chemsafe 100C HP is safe for use on both indoors and outdoors, making it a versatile tool for any contractor. For best results, always test Chemsafe 100C HP on an inconspicuous area before beginning your project.
Mastic is a type of adhesive that is commonly used to attach tiles and flooring. Although it is very strong, mastic can be removed with the right tools and techniques. To remove mastic manually, saturate it with a remover solution and allow it to penetrate for several minutes. Then, use a stiff broom or squeegee to dislodge the mastic. If necessary, repeat this process until all of the mastic has been removed. Once the job is complete, be sure to thoroughly rinse and clean the surface. Surface must be completely rinsed clean and allowed to dry before any replacement materials can be installed. Dispose of in accordance with federal, state and local regulations.
General ID Hydrocarbon Mixture
Odor Very Light Solvent
Color Blue Liquid
Flash Point >141F
Coverage 75-100 sq. ft./gal
Vapor Density (air=1) >1
Solubility in Water Emulsifies in water
Specific Gravity (water=1) Chemsafe 100 .8077
Chemsafe 100C .8277
Percent Volatile 90-99
Evaporation Rate (butyl acetate=1) <1
Boiling Range >300OF
Vapor Pressure(mm hg) Chemsafe 100 <1
Chemsafe 100C CARB/OTC Compliant
Clean Up Water & Detergent
Application Manual or Airless
Shelf Life 1 Year
Shipping Class 55
Shipping Weight 5 gal. = 37 lbs.
55 gal. = 415 lbs.
DOT Shipping Name Combustible Liquid NOS
DOT Hazard Class 3, PG III, NA1993